Specifications | ||
Model | MR-MQ300 | |
Infrared Positioning Device | Accurate and convenient positioning of the pole piece | |
Quality | Vertical burr ≤15μm, horizontal burr ≤20μm; | |
The life of the Die | Normal use ≥30,000 times | |
Maximum die cutting size | 280x180mm (can be customized according to customer requirements) | |
Punching accuracy | ±0.1 mm | |
Air Cylinder | 3 tons Max. pressure Attention: If a gas cylinder is used instead of an air compressor, a two-stage pressure regulator must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. | |
Die cutting stroke | 150mm | |
Gas-liquid air cylinder drive | punching force and punching speed adjustable | |
Production Yield | 800 - 2000 pieces of electrodes per hour | |
Warranty | One-year limited warranty with lifetime support Rusting and damage due to improper storage condition or maintenance are not covered by warranty | |
Safety Sensor | Built-in IR sensor (Safety Curtain) to protect against hand injuries during electrode feeding | |
Power supply | 220V/50Hz or 110V/ 60Hz | |
Max. Power Consumption | 100W | |
Compressed air | 0.5 Mpa to 0.8 Mpa | |
Dimensions | L580xW455xH900mm | |
Weight: | 180kg |